This is default featured slide 1 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Pages

Rabu, 30 April 2008

2006 Porsche Carrera GT


High-Performance Carrera GT with Technology of the Future
With its V10 engine providing more than 600 horsepower and with an array of cutting edge technologies including a ceramic composite clutch and brakes beneath its carbon-reinforced body, the Porsche Carrera GT uses the undiluted qualities of a genuine racecar to provide an unprecedented driving experience on the road.

Beautiful Design and Engineering, and 605 Horsepower

The Porsche Carrera GT, which was introduced as a 2004 model, is a low, sleek, lightweight roadster that is as beautiful to the engineer as it is to the eye. Foul weather protection is also available in the form of two removable panels that can be stored in the front trunk.

Among the car’s unique features are its 5.7-liter, 605-horsepower V10 engine, its monocoque chassis with Porsche-patented engine and transmission mounts made of carbon-reinforced plastic and the first use of a ceramic composite clutch in a production car. The Carrera GT’s aerodynamic and race-bred suspension package provides safe and stable travel at speeds of up to 205 mph (330 km/h). The Carrera GT features the extensive use of lightweight materials, such as magnesium for the car’s substantial wheels and the frames of its special sport seats.

The result of such artistic and athletic equipment is a car that accelerates from a standing start to 62 mph (100 km/h) in only 3.9 seconds, reaches 100 mph (160 km/h) in less than seven seconds, 125 mph (200 km/h) in less than 10 seconds, and can achieve a top test-track speed of 205 mph (330 km/h).

Purebred Racing Engine

Porsche’s development center in Weissach, Germany, built a 5.5-liter, normally aspirated V10 engine for racing, and that engine’s bores have been enlarged to displace 5.7 liters in the Carrera GT. Maximum output is rated at 605 horsepower at 8,000 rpm, with peak torque of 435 lb-ft. The engine has a very low center of gravity, a 68-degree V angle and four valves-per-cylinder heads. The engine block serves as a load-bearing part of the chassis structure, yet is so strong that there is no distortion to the cylinder bores. Using dry-sump lubrication reduces the number of engine components and seals and also helps optimize weight and reliability.

The engine has a closed-deck configuration, a principle carried over from motorsports. This closeddesk architecture enables the cylinders to be cooled by internal water chambers that directly surround the cylinders. Three front-mounted radiators and cross flow cooling ensure optimum heat transfer even under high engine loads.

The engine weighs only 472 pounds (214 kg). The block, crankshaft and camshafts are all made of light alloys. The crankshaft is designed to operate at speeds of up to 8,400 rpm and is both forged and designed for minimum mass inertia and thus offers maximum torsional stiffness.

Race-winning Suspension Design

The chassis and suspension of the Porsche Carrera GT are based on the architecture of the Porsche GT1, the car that won the 24 Hours of Le Mans race in 1998. For example, as on the GT1, the rear track control arms of the Carrera GT are made of aerodynamically designed steel tubes. However, Porsche engineers did not forget the need for driving comfort on the street when they adapted such racing-bred systems for the road-going supercar.

Like a racecar, the Carrera GT uses pushrod suspension with double-track control arms at all four corners to give the Carrera GT its refined response and behavior, feeding forces smoothly and efficiently into the car’s chassis. Where many cars use MacPherson spring struts, the Carrera GT’s spring and damper elements are operated by stainless steel pushrods and pivot levers, which separate the guidance function from the spring action.

Functional Ambience is Interior Theme

Even with its racing-quality performance, the Porsche Carrera GT has a cockpit characterized by functional ambience and the extensive use of high-tech materials. Carbon, magnesium and leather dominate interior materials, with composite components either in their natural state or painted to match the magnesium pieces.

The car’s center console is made of composite materials covered in galvanized magnesium and features the chassis number imprinted on the surface. The shift lever is positioned about halfway up the console directly next to the steering wheel.

The seats are finished in smooth leather and have manual adjustment (fore, aft and height) because power motors would add unnecessary weight. The seats are made of a composite carbon shell. Each seat weighs only 23.6 pounds (10.7 kg.), compared to 44.1 pounds (20 kg.) for the seats in a typical Porsche 911.

Air conditioning is optimized for weight and the car comes with a standard air filter system. A glass screen is mounted between the supplemental safety bars to help reduce wind buffeting. Even though the Carrera GT is a serious performance car, it can be equipped with many comfort features, including a navigation system and Bose audio. A battery trickle-charger is included as standard equipment.
Base Price: 2006 Porsche Carrera GT - Approx. $484,000 / 450,000 € (last update: 2/20/2007)

2008 Porsche 911 GT2


High-Performance Sports Car with Low Fuel Consumption
With a stunning 530 turbocharged horsepower and the most revolutionary design in the industry, Porsche revealed its most powerful production 911 ever on September 11, 2007 at the Frankfurt Motor Show. Based on the current 911 Turbo, the 911 GT2 will easily ascend to lead the impressive Porsche family of vehicles.

New features such as large air intakes at the front and the rear wing, coupled with the rear-wheel drive and manual six-speed gearbox, express the elite performance abilities that are exclusive to this outstanding model. This high-performance athlete accelerates to 60 mph in just 3.6 seconds and reaches a top track speed of 204 mph.

530-Horsepower Twin-Turbo Engine

The power unit of the new 911 GT2 is based on the six-cylinder boxer engine of the 911 Turbo, with air supply driven by two exhaust gas turbochargers featuring variable turbine geometry (VTG). The 3.6-litre boxer engine achieves a maximum output of 530 (SAE) horsepower, an increase of 50 horsepower from the previous 911 GT2. The power increase is provided by two turbochargers with a larger compressor wheel and a flow-optimized turbine housing raising turbocharger pressure to an even higher level.

Decreased Fuel Consumption

The new 911 GT2's expansion intake manifold, which uses oscillating air in the intake during the cooler expansion phase, keeps the temperature of the fuel/air mixture even lower than in the 911 Turbo. This results in a significant increase in all-round efficiency, with fuel consumption down by up to 15 percent under full load despite the increase in engine output. This is a genuine innovation for turbocharged power units.

Functional Design Features

A number of elements set the new 911 GT2 apart including the new achievements in emission management and control. This is the first Porsche homologated for the road to feature a muffler and tailpipes made of titanium as standard equipment. This expensive material reduces weight by approximately 50 percent vs. a comparable component made of stainless steel.

The new 911 GT2 comes as standard with PCCB brakes featuring brake discs made of a composite carbon fiber/ceramic compound ensuring highly consistent and maximum stopping power. Also standard is the electronically controlled Porsche Active Suspension Management (PASM) system.

The GT2 comes on 19-inch light-alloy wheels filled with 235/35 ZR19 front sport tires and 325/30 ZR19 rear sport tires. It is scheduled to make its North American debut in early 2008 at a US price of $191,700.
Base Price: 2008 Porsche 911 GT2 - $191,700 / 189,496 € (last update: 10/15/2007)

2007 Porsche 911 Turbo


The Everyday Supercar: Porsche 911 Turbo
The 2007 911 Turbo may be unmatched in its breadth of performance. Few machines can so easily warp our perception of what is possible from a state-of-the-art performance car, and yet so ably serve as a practical and comfortable conveyance for every-day driving. The new Porsche 911 Turbo features a revolutionary 480-horsepower, twin-turbocharged, 3.6-liter boxer engine with the world’s first gasoline-engine application of variable turbine geometry (VTG), a redesigned all-wheel-drive system, and evolutionary styling.

The new 911 Turbo’s engine produces 480 hp at 6,000 rpm, 60 bhp more than its predecessor, raising specific output of the 3.6-liter boxer-Six to an all-time high of 133 bhp per liter. More notable is the engine’s torque curve, which has been bolstered and broadened by the variable turbine geometry system. Peak torque rises to 457 lb-ft (previously 415 lb-ft), but that peak now spans an extended rpm range from 1,950 to 5,000 rpm, compared to 2,700--4,600 rpm in the previous 911 Turbo. Additionally, a function in the optional Sport Chrono Package allows a 10-second, mid-rpm-range ‘overboost’, temporarily increasing turbo boost under full throttle by 2.9 psi, and swelling peak torque to 502 lb-ft.

A 911 Turbo equipped with the optional 5-speed Tiptronic S automatic transmission requires only 3.4 seconds to sprint from 0 to 60 mph. Equipped with the standard six-speed manual transmission, the new 911 Turbo reaches the same 60 mph mark in 3.7 seconds. With either gearbox, the top track speed of the new 911 Turbo is 193 mph.

Much of the 911 Turbo’s improved performance can be attributed to the variable turbine geometry system, the first such system available on a turbocharged gasoline engine. The heart of the technology is adjustable guide blades, which can vary in angle to most effectively guide engine exhaust flow onto the turbocharger’s impeller wheel. The result is a system that provides the advantages of both a small and large turbocharger, improving flexibility and acceleration, particularly at low engine speeds.

To transfer this power to the road, the new 911 Turbo features a redesigned all-wheel-drive system, with an electronically controlled multi-disc clutch replacing the previous model’s viscous clutch. Porsche Traction Management (PTM) allows variable power distribution fore and aft, and depending on conditions, the system’s electronics constantly determine optimal torque distribution to ensure ideal traction. In use, PTM provides exceptional agility on winding roads, outstanding traction in inclement conditions, and impressive active safety even at higher speeds. Though powerful, the 911 Turbo’s PTM setup is one of the lightest all-wheel-drive systems on the market.

The new 911 Turbo’s accelerative performance is duly tempered by its brake system, which is comprised of six-piston monobloc calipers up front, and four-piston monobloc calipers at the rear. Brake disc diameter at all four corners has been increased 20 mm, to 350 mm (13.78 in.). Optional is Porsche’s Ceramic Composite Brake system (PCCB). In addition to the exotic pad and rotor material, the PCCB option provides an increased front disc diameter (380 mm /14.96 in.), absolute corrosion resistance, improved fade stability, and a 37-pound unsprung-weight savings versus the standard brake system.

Styling changes made to the new 911 Turbo are evolutionary. The modified front end features tautly drawn cooling air inlets, widely spaced and deep-set fog lights, and new LED indicators situated in the lateral air inlets. From the rear, the Turbo takes on a more powerful stance thanks to a tail 22 mm (0.9-in.) wider than that of the previous model. The redesigned wing spoiler has been aligned to the wider profile, and slopes downward slightly at each end to nestle the rear fender’s contours. The lateral air inlets behind the doors have also been redrawn, and together with the new air ducts, afford a more efficient supply of cooling air to the intercoolers.
Base Price: 2007 Porsche 911 Turbo - $122,900 / 133,603 € (last update: 4/2/2007)

2007 Nissan NISMO 350Z


Taking Performance One Step Further With the NISMO 350Z
For the first time ever in the Nissan Z’s 37-year history, a high-performance NISMO 350Z is part of the extensive Z lineup. The new 2007 Nissan NISMO 350Z, which makes its North American debut at the 2007 New York International Auto Show, features an extensively developed list of unique equipment – including a special body package and improved handling equipment. This new model, the fifth in the 2007 350Z Coupe lineup, is available with a 6-speed manual transmission only. It goes on sale at Nissan dealers nationwide in July 2007.

NISMO, the premier supplier of high-performance aftermarket parts and accessories for Nissan vehicles in the United States since 2003, previously participated in the development of the NISMO Frontier off-road pickup truck, introduced in 2005. The NISMO 350Z is the second Nissan model to be branded with the legendary marque. Like the Frontier model, which is specially equipped for off-road excursions, the 2007 NISMO 350Z is optimized for enthusiast drivers.

"With the combination of the new VQ35HR engine found on all 2007 350Zs and NISMO performance and design enhancements, the NISMO 350Z represents the pinnacle of Nissan performance machines," said Bill Bosley, vice president and general manager, Nissan Division, Nissan North America, Inc.

The most striking visual feature of this special vehicle is the NISMO aerodynamics package, which strongly resembles the Super GT championship winning Zs. Featuring an aggressive front fascia with chin spoiler, side skirts, an extended rear fascia with underbody diffuser and a rear wing, the NISMO 350Z produces additional aerodynamic downforce to provide enhanced cornering and handling performance.

Special consideration is given during assembly of the NISMO 350Z – structural rigidity is enhanced by additional body welds to the already rigid 350Z body and additional supports have been added front and rear. The NISMO 350Z also utilizes special body dampers mounted in the front radiator core support and in the rear cargo area, which assist in controlling body vibrations.

Additional performance features include a special NISMO-tuned independent multi-link suspension, Brembo brakes with four-piston front and two-piston rear calipers (with 12.8-inch front and 12.7-inch rear rotors) and special NISMO-branded gunmetal gray RAYS super lightweight forged-alloy wheels (18x9-inch front and 19x10-inch rear with 245/40 WR18 front, 265/35 WR19 rear Bridgestone Potenza RE050A tires). A special NISMO-branded tuned exhaust adds an even more authoritative tone to the Z’s 306-horsepower V6 engine.

"The combination of aerodynamic enhancements and performance tuning adds up to a Z with enhanced cornering, steering precision and handling," said Bosley. "Every exterior and mechanical improvement made to the NISMO 350Z isn’t just for show, it’s also for performance."

Four exterior colors are available, including Redline Red, Magnetic Black, Silver Alloy and Pikes Peak White.

Inside, NISMO 350Z drivers receive special treatment with unique black cloth seats with red inserts, red stitching throughout the interior and special NISMO white-faced tachometer. All NISMO 350Zs receive a serialized NISMO-etched aluminum plaque mounted on the center console, designating its limited edition status.

The NISMO 350Z includes a full complement of 350Z standard features, including the new VQ35HR 3.5-liter V6 engine producing 306 horsepower at 6,800 rpm and 268 lb-ft of torque at 4,800 rpm – with more than 90% of torque available between 2,000 and 7,000 rpm. Engine features include variable exhaust cam timing (eCVTCS), a 7,500 rpm rev limit and a symmetric twin ram air intake system.

The standard 6-speed manual transmission features close-ratio gearing from 1st through 5th gears for high-performance driving and an overdrive 6th speed for highway fuel economy. For performance handling, standard on the NISMO 350Z is a Traction Control System (TCS) and Viscous Limited-Slip Differential (VLSD).

Also standard is electronically-controlled vehicle speed-sensitive dual-orifice rack-and-pinion power steering system, front and rear strut tower bracing, 4-wheel disc Anti-lock Braking System (ABS) with Electronic Brake force Distribution (EBD) and Brake Assist (BA), HomeLink Universal Transceiver, cruise control, aluminum pedals, illuminated steering wheel audio controls and auto dimming rearview mirror, power windows, 3-bay gauge cluster, High Intensity Discharge (HID) bi-xenon (high and low beam) headlights, LED taillights, Advanced Air Bag System, side and curtain side-impact supplemental air bags and Active Head Restraints.

"The NISMO 350Z is geared towards enthusiasts who want the ultimate 350Z straight from the factory performance experts,” said Bosley. “They also want a Z that makes a statement and is a testament to their love of driving."
Base Price: 2007 Nissan NISMO 350Z - $38,070 (last update: 6/14/2007)

2008 Mitsubishi Lancer Evolution X


All-new 2008 Lancer Evolution: Super-All Wheel Control, 6-Speed Automated Manual Transmission
Mitsubishi Motors is introducing the 2008 Lancer Evolution, the newest and most sophisticated version of the legendary high-performance model series that began 16 years ago. While remaining true to the core values that have made the Lancer Evolution synonymous with thrilling performance, the next-generation model offers all-around capability and user technology that distinguish the world's best performance models.

The strikingly styled 2008 Lancer Evolution showcases new performance and handling technology, including an all-new 291-bhp 2.0-liter turbocharged/intercooled engine and the Super-All Wheel Control (S-AWC) dynamic handling system. S-AWC offers an extraordinary level of control at each wheel, going well beyond the capabilities of other all-wheel drive systems.

Two Lancer Evolution models will be offered in the U.S. market for 2008: the GSR with a new 5-speed manual transmission and the Lancer Evolution MR with a new 6-speed Twin-Clutch Sportronic Shift Transmission (TC-SST), a new-generation automated manual transmission. The MR model is also equipped exclusively with Bilstein shock absorbers and Eibach springs, two-piece brake rotors for better heat dissipation, BBS forged-alloy wheels, HID headlamps and additional interior features. Significantly, the newest Lancer Evolution will have less differentiation from market to market than the previous generations.

Design Evolution

The 2008 Lancer Evolution design makes a maximum performance statement, blending concept car themes and sound aerodynamic principles while conveying the brand's rally heritage. A shark-nosed front end inspired by jet fighter air intakes, a distinct wedge-like profile and crisp, taut lines highlight the basic new-generation Lancer design. Building on those themes, the 2008 Lancer Evolution looks the part of the street-wise sports machine with its a unique front end, aggressively sloping hood with integral air scoop and engine heat outlets, boxed fenders, and 18-inch alloy wheels with Brembo brakes.

Inside, the Lancer Evolution presents a "class up" approach and shows a new international flair. Available user technology, including high-end Rockford Fosgate® audio and navigation systems, reflects the tastes of a broadening customer base.

All-new 2.0-liter Turbo Engine

The 2008 Lancer Evolution's 4B11 engine is an intercooled-turbocharged 2.0-liter DOHC inline 4-cylinder. Beyond that description, it differs greatly from the legendary 4G63 it replaces. The 4B11 is built with a reinforced cast-aluminum cylinder block versus the cast-iron block used in the 4G63, and aluminum is also used for the cylinder head and cover and the timing chain case.

The new 4B11 T/C produces more power than its predecessor: 291 bhp at 6,500 rpm (vs. 286 bhp at 6,500 rpm) and 300 lb-ft of peak torque at 4,400 rpm (vs. 289 lb-ft at 3,500 rpm). The 4B11 T/C provides a broader torque curve, as well. A revised turbocharger yields up to 20-percent quicker response at lower engine speeds versus the 2006 engine's turbocharger.

New TC-SST Automated Manual Transmission

Exclusive to the Evolution MR model for 2008, the 6-speed Twin-Clutch Sportronic Shift Transmission (TC-SST) is an automated manual transmission capable of executing lightning-quick upshifts with no drop-off in engine power. The TC-SST features both a console-mounted shifter and magnesium steering wheel paddle shifters and offers manual and fully automatic modes.

Essentially, the TC-SST is a manual transmission that can select two gears at a time: one gear is engaged by one of the two wet multi-plate clutches, and the other is pre-selected, awaiting to be engaged by the second clutch. The gear change is made - either manually or automatically depending on mode selected - when the electro-hydraulically operated clutches are "swapped," which occurs simultaneously, with no perceptible lag time.

Super-All Wheel Control (S-AWC)

In the 2008 Mitsubishi Lancer Evolution, Super All-Wheel Control (S-AWC) is not simply the name of a new all-wheel drive system. Rather, S-AWC regulates drive torque at each wheel by controlling a network of dynamic handling technologies, including: Active Center Differential (ACD) 4-wheel drive, Active Yaw Control (AYC) rear differential, Active Stability Control (ASC), and Sports ABS brakes. Integration of ASC is new for all markets and also provides a significant advance in both dynamic capability and safety.
Base Price: 2008 Mitsubishi Lancer Evolution X - $32,990 (last update: 1/14/2008)

2007 Mercedes-Benz SLR 722 Edition


New Mercedes-Benz SLR 722 Edition: Born on the Racetrack
The new Mercedes-Benz SLR 722 Edition has all the attributes of a thoroughbred racing car. Refined in numerous respects, this super sports car has more output, a tailor-made suspension configuration and a decidedly sporty interior. Sale of the SLR 722 Edition in the U.S. has not been confirmed.

Continuing the Tradition

The new model variant SLR 722 Edition is a homage by Mercedes-Benz to the unforgettable victory won by the British racing legend Stirling Moss and his co-driver Denis Jenkinson in a Mercedes-Benz 300 SLR with the starting number 722 (indicating a start time of 7.22 a.m.) at the Mille Miglia in 1955. With an output of 650 bhp and a corresponding performance, the new super sports car, which goes on sale on July 11, 2006, will not only make the hearts of car enthusiasts beat faster.

The supercharged 5.5-liter V8 engine in the 722 Edition, which is hand-built in the AMG engine shop in Affalterbach, generates 650 bhp. The particular strengths of this high-performance engine are immediate response to movements of the accelerator, highly emphatic torque build-up and an unmistakable V8 sound. The performance figures are outstanding even for a high-end sports car: the 722 Edition accelerates from standstill to 62 mph in only 3.6 seconds, and 124 mph is reached in just 10.2 seconds. The top speed (209 mph) is above the 207 mph previously achieved by the SLR.

Handling characteristics worthy of the racetrack are also provided by the sophisticated suspension, with 19-inch light-alloy wheels, a stiffer damper configuration and 0.4 inches lower body. Larger brake discs with a diameter of 390 mm ensure excellent braking performance.

Discreet visual modifications mark the Mercedes-Benz SLR 722 Edition out as special, in line with the wishes of the enthusiastic gentleman drivers and wealthy sports car collectors who make up the core target group. The modified front spoiler with an air splitter, as well as the rear diffuser, improve both the aerodynamics and contact pressure at high speeds, and reflect the transfer of cutting-edge technology from motor racing. At the same time, the use of clear-lacquered carbon as an extremely strong yet lightweight material symbolizes the practicality of these technical features. Bucket-type sports seats upholstered in leather/Alcantara provide outstanding lateral support, while the grippier racing steering wheel with a hunting-leather lining, gearshift paddles and black carbon highlights lend a thoroughbred racing touch to the interior.

Exclusive "SLR. Club" for SLR owners

Before the sales release date, customers and selected guests will have the advance opportunity to appraise the new SLR 722 Edition. This is to mark the foundation of the worldwide "SLR. Club" at the Circuit Paul Ricard in Le Castellet, southern France. As an ultra-exclusive community of which SLR customers automatically become members, the "SLR Club" provides an attractive platform for outstanding events related to the SLR, as well as numerous other benefits. Another exciting feature is the club’s SLR Safety & Speed Academy, which offers special driver training courses and seminars. David Coulthard, Jochen Mass, Klaus Ludwig, Chris Goodwin and Christina Surer are among the highly skilled and well-known instructors.
Base Price: 2007 Mercedes-Benz SLR 722 Edition - 646,840 € (last update: 3/27/2007)

2007 Lamborghini Murcielago LP640


The New Lamborghini Murcielago LP640
The new Lamborghini Murcielago LP640 features considerable innovations in terms of body design and mechanics. And also with a new name: Murcielago LP640, which refers to its engine position - longitudinale posteriore - and to its power 640 bhp. Designers and engineers have not only focused on reworking the engine, suspensions, gearbox, exhaust system, brakes and electronics, but also the interior and exterior design; improvements that make the Murcielago LP 640 the most extreme and fastest sports car in its class, placing it at the very top.

The first vehicles will be available in spring 2006. Since the original Murcielago’s debut at the 2001 International Car Show (IAA) in Frankfurt, around 2,000 vehicles have left the car plant in Sant’ Agata Bolognese.

Unmistakable Lamborghini Design

In their reinterpretation of the Lamborghini Murcielago LP640, the designers at the Lamborghini Style Centre have remained true to the traditional Lamborghini principles of purism, sport and function. The Murcielago LP640 now appears even more aggressive, with the new front and rear bumpers contributing significantly to its appearance. The exhaust system terminal has been incorporated in the diffuser on the rear bumper. Other innovations include the rear lights, which enhance the distinguishing features of the Murcielago LP640, making it unmistakable even at night. The design of the sides is also worth mentioning: while the area behind the air intake on the right side is practically closed, the left side features a vast aperture for cooling the oil radiator. Together with the aerodynamically defined front and rear, this proves yet again that the shape of a Lamborghini is dictated by function.

More Powerful Engine

The engine of the new Murcielago LP640 has undergone outstanding and radical modification. The increased bore and longer stroke have boosted the displacement of the classic 60° V-engine from 6.2 liters to 6.5 liters. Thus the already extraordinary 580 bhp engine power has now been elevated to an impressive peak of 640 bhp at 8,000 rpm. The 12-cylinder engine reaches a maximum torque of 487 lb-ft at 6,000 rpm.

The new Murcielago LP640 features a modified sixratio gearbox as well as a tougher rear differential and new axle shafts. On request, the e-gear automatic gearbox is also available equipped with the new dedicated “Thrust” (acceleration program) mode.

Frame and Chassis: Perfect Harmony

The body of the Murcielago LP640 with its characteristic scissor doors is created from the prized union of sheet steel and honeycombed carbon fiber, glued and riveted together.

Driving, handling and stability at high speed are enhanced by new springs and stabilizers, as well as by a redesigned electronically controlled damper. The "antidive" and "anti-squat" features on the axles, which efficiently prevent so-called "brake diving" and "squatting", have not been changed. The two springs on every rear wheel, the single spring on every front wheel and the damper are placed coaxially.

Optional CeramicCarbon Brakes

The dual hydraulic circuit brake system equipped with a vacuum brake booster ensures considerable deceleration values. The self-ventilating front and rear brake disks measure 380 mm x 34 mm and 355 mm x 32 mm respectively. The control circuit of the four-channel anti-blocking system (ABS) with electronic brake control (DRP) and traction control (TCS) features a new characteristic curve. The system consists in an electro-hydraulic control unit and four speed sensors.

When particularly high braking performance is required, it is possible to equip the vehicle with 380 mm x 36 mm ceramic carbon brakes featuring six-piston brake calipers.

Even More Exclusive Interior

The seats in the cockpit have undergone the most radical changes; more spacious and equipped with redesigned head restraints, the seats now ensure better comfort. The leather upholstery features lozenge-shaped stitching called "Q-citura". The same design is recaptured on the upholstery on the door panels, the panel between the seats and the engine compartment, and on the roof panel.

A new instrument panel has been developed with lights featuring a new graphic design, flanked by a new Kenwood car radio with a 6.5” widescreen monitor and DVD, MP3 and WMA player. An optional navigation system is also available (standard in Japan).
Base Price: 2007 Lamborghini Murcielago LP640 - £190,000 (last update: 3/27/2007)